Generally used for exterior applications. It is operated with a key from the exterior of the home and a push button or turn knob from the interior.
Generally used on bathroom or bedroom door. It provides a push button or turn knob on the inside and comes with an emergency release on the outside that allows the door to be unlocked by inserting an emergency release tool.
Generally used on closets or other rooms that do not require locking.
Generally used on storage room that the outside knob is fixed and entrance by key only. The knob will lock itself everytime the door is closed and cannot be left unlocked. The inside knob always remain unlocked providing emergency exit.
Does not operate and is often used as a door pull or for aesthetic purposes only.
To determine the handing, view the door from the exterior side and locate the hinges. If the hinges are on the left, you will need a left-handed lever. If the hinges are on the right, you will need a right-handed lever.
U.L. is an abbreviation for Underwriters Laboratories. U.L. is a testing and regulation organization that is generally associated with products designed to meet fire codes.
The Americans with Disabilities Act was established to provide equal opportunities for individuals with disabilities throughout all aspects of life. A major part of this Act's requirements is accessibility to public accommodations. To simplify this, as related to locks, it specifies hardware that does not require tight grasping, tight pinching or twisting of the wrist to operate or open a door. Many of the leversets that we offer will provide for ease of use as established by the A.D.A. Guidelines.
California State Reference Code
(Formerly Title 19, California State Fire Marshal Standard) Levers returning to within 1/2" (12.7mm) of door surface.
Grade 2 & Grade 3
These are certification standards ratings developed for the U.S. that provide an easy reference to the strength, security, and durability of a lock. Lock rated as Grade 3 is not as strong as a lock rated at Grade 2. For a lock to pass Grade 3 standards it must endure 200,000 cycles of opening and closing, whereas a Grade 2 lock must pass 400,000 cycles. The lock's strength is also tested in increased severity as applied to forced entry through a door.